Pitch Control Voltages: 1 volt per octave
Waveform Voltages: 0- 5V and +/- 2.5V peak-peak
Signal Input Impedance: typically 50-100K
Signal Output Impedance: typically 1K
Envelope Voltages: 0-5V
DC Power: +15V, -15V
AC Power: 115VAC, 220-240VAC
1 / 8" thick flat aluminum punched and drilled.
Panels are black anodized with text and markings in aluminum color
where the anodizing has been masked out. This is a superior panel
making technique, both durable and sharp with no ink to rub off and
was the chosen method of early Moog modules. Panels are 9 inches tall
and 2 1 / 4" inches wide for single modules and 4 1 / 2"
inches wide for Sequencer 17a
1/16" aluminum laser cut with bent flanges for rigidity.
Panels are painted with semi-gloss Sherwin Williams Alkyd enamels
and then baked at high temperature to produce a tough and attractive
Text and graphics are silk screened using epoxy inks and then baked
for solid adhesion.
Panels are 8-3/4" tall (5U) and either 1-3/4" (1U) or 3-1/2"
All modules require a plus and minus 15V LINEAR
supply with a suggested current rating of 1.5 amps.
Power supplies from Modcan are 1.5 amp and are only available with
purchase of Modcan chassis box.
Customers wishing to build their own cases or enclosures can purchase
PSU from Power One through DigiKey or Mouser Electronics.
Banana jacks where chosen for
Allows stacking of plugs, therefore no mults required making complex
Cost- high grade jacks and access to patch cables of astounding durability
available for reasonable cost.
Color- available in many colors allowing for color coding of input,
output ,cv inputs etc.
Used in many labs for test equipment.
Good quality "Switchcraft clone"
jacks are used throughout.
Many are used in switching applications to provide multiple functions
saving panel space.
Modules are built on a per order basis.
Contact us for lead
times and delivery dates.
UPS standard or USPS unless otherwise specified